737 GPS Chartplotter Operations Manual531592-1_A737 GPS Chartplotter Operations Manual
How Sonar WorksSonar technology is based on sound waves. The 700 Series™ Fishing System uses sonar to locateand define structure, bottom contour and c
91Low Battery AlarmLow Battery Alarm sounds when the input battery voltageis equal to or less than the menu setting. The battery alarm will only sound
92Temp AlarmTemp Alarm sounds when the water temperature detectedby the 700 Series™ reaches the Temp Alarm setting, which is either set in degrees Fah
93Arrival Alarm(with optional-purchase GPS receiver)Arrival Alarm sounds when the boat has either exceeded the distance to the destinationwaypoint, or
94Alarm ToneAlarm Tone selects the pitch of the alarm sound. A brieftone will be produced as you adjust the Alarm Tone so that you can select the tone
95Setup Menu TabFrom any view, press the MENU key twice to access the tabbedMain Menu System, then press the RIGHT cursor key until theSetup tab is se
96Units - Depth Units - Depth selects the units of measure for all depth-related readouts. To change the Units - Depth setting:1. Highlight Units - De
97Units - Speed (with Temp/Speed or optional-purchase GPS receiver) Units - Speed selects the units of measure for speed-related readouts, and will ap
98Triplog Reset (with Temp/Speed or optional-purchase GPS receiver) Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/S
99Select Readouts (Advanced, Sonar view only) Select Readouts sets individual digital readouts on theSonar View. This Advanced feature allows y
100To Select Readouts:1. Make sure you are in Advanced User Mode, then highlight Select Readouts on theSetup main menu.2. Use the RIGHT 4-WAY Cursor
2The sound pulses are transmitted at various frequenciesdepending on the application. Very high frequencies (455kHz)are used for greatest definition
101Depth Offset (Advanced) Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat'skeel. Enter a positiv
102Temp Offset (Advanced) Temp Offset will adjust the temperature readout by the amount entered. This menu choice isavailable only when in Advanced Us
103Daylight Saving Time (Advanced, with optional-purchase GPS receiver only)Daylight Saving Time adjusts the time display to account for local Dayligh
104Date Format (Advanced, International and optional-purchase GPS receiver only)Date Format changes the date format used by the unit This menu choice
105NMEA Output (Advanced) NMEA Output turns the NMEA* output on or off. This menu choice is available only when inAdvanced User Mode (see Setup Menu
106Views Menu Tab From any view, press the MENU key twice to access the tabbedMain Menu System, then press the RIGHT 4-WAY Cursor Controlkey until th
107Accessories Menu TabFrom any view, press the MENU key twice to access the tabbed Main Menu System, then press theRIGHT cursor key until the Accesso
108To make a screen snapshot (Screen Snapshot must be enabled):1. Make sure you have installed an optional-purchase MMC/SD card into your card slot.2.
109TroubleshootingBefore contacting the Humminbird® Customer Resource Center, please read the followingsection. Taking the time to review these troubl
110Display ProblemsThere are several main conditions or sources of possible interference that may cause problemswith the quality of the information di
3QuadraBeam PLUS™ SonarYour 700 Series™ Fishing System supportsQuadraBeam PLUS™ sonar. QuadraBeamPLUS™ sonar provides an extremely wide 90°area of cov
111Finding the Cause of NoiseElectrical noise usually affects the display with many black dots at high speeds, and highsensitivity readings. One or mo
112700 Series™ Fishing System AccessoriesAccessories customize the 700 Series™ Fishing System to your needs and enable you to stay onthe edge of new t
113PLUS™ technology (available with all Humminbird® DualBeam PLUS™ models). An expandedview and greater bottom detail gives you a totally new perspect
114SpecificationsDepth Capability ... 1500 ft (450 m)Powe
115GlossarySonar Terms:Alarm, Depth: Depth Alarm is a user-controllable, audible alert that sounds when depth is lessthan or equal to the setting.Alar
116Customizable Digital Readouts: Customizable Digital Readouts is a Humminbird® feature thatpermits the user to select the specific digital informati
117Freeze Frame: Freeze Frame is a Humminbird® feature that pauses the sonar scrolling so that theimage on screen can be studied with greater detail.
118dot pattern. Electrical noise can be isolated by selectively turning on and off other electricaldevices to determine the source. Often re-routing t
119Quick Disconnect Mount: The Quick Disconnect Mounting system is an exclusiveHumminbird® feature that permits the unit to be easily removed from the
120Sonar Update Rate: Sonar Update Rate is the number of times per second that thetransmitter/receiver sends and receives sonar signals. A very fast s
4WideSide® Sonar(with optional-purchase WideSide® transducer)Your 700 Series™ Fishing System also supportsWideSide® sonar with the purchase of an addi
121Time Variable Gain: Time Variable Gain is a processing step applied to the sonar return to"normalize" the data so that objects of equal s
122WhiteLine®: WhiteLine® is a Humminbird® feature that highlights the strongest sonar return onthe display using a very light gray band. This is pref
123Altitude: Altitude measures height above sea level. Altitude is a measurement that can beprovided by GPS.Bearing (BRG): Bearing is the direction t
124GPS: GPS is an acronym for Global Positioning System. GPS provides accurate position (latitude,longitude, altitude) information virtually anywhere
125Route: A Route is series of waypoints linked together in a specific sequence to define a navigationpath between two points, and saved in the fishfi
126Trackplotter: Trackplotter describes a navigation device that shows Present Position, along withTrack, Waypoint, and Routes, but NO MAP in the back
127Notes
128Notes
129Contact Humminbird®Contact the Humminbird® Customer Resource Center in any of the following ways:By Telephone:(Monday - Friday 8:00 a.m. to 4:30 p.
5How GPS and Cartography Work (with optional-purchase GPS Receiver)With the purchase of an additional GPS Receiver, your 700 Series™ Fishing System al
6Your 700 Series™ supports Navionics® Gold, HotMaps™ and HotMaps™Premium on MMC or SDcard media. NOTE: Your 700 Series™ does not support Navionics® C
7What’s On the DisplayThe 700 Series™ Fishing System can display a variety of useful information about the areaNOTE: Entries in this view that list (w
8under and adjacent to your boat, including the following items:optional-purchase device is connected to the 700 Series™ Fishing System. If both devi
9ViewsThe views available on your 700 Series™ Fishing System are:Sonar views: Navigation views:• Sonar View • Bird’s Eye View• Zoom View • Chart View•
Sonar ViewSonar View presents a historical log of sonar returns. Depth is always displayed. Readouts fortemperature and speed are automatically displ
Thank You!Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has builtits reputation by designing and manufacturin
11Understanding Sonar HistoryIt is important to understand the significance of the 700Series™ Fishing System display. The display does NOT show aliter
12Bottom PresentationAs the boat moves, the unit charts the changes in depth on the display to create a profile of theBottom Contour. The type of bott
13Inverse is a method where weak returns are shown with darkpixels and strong returns with lighter pixels. This has the benefitof ensuring that weak
14Sonar Zoom ViewSonar Zoom View increases the displayed resolution to separate sonar returns that are very closetogether, such as those caused by fis
15200/83 kHz Split Sonar View Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screenand displays sonar retur
Big Digits ViewBig Digits View provides digital data in a large, easy-to-see format. Depth is always displayed.Readouts for temperature, speed and Tri
17Snapshot and Recording ViewSnapshot and Recording View displays and allows you to view both screen snapshotthumbnails and recording icons captured t
Screen Snapshot: When Screen Snapshot is enabled (from the Accessories menu tab),pressing the MARK key creates a saved screen capture (when you have a
19Recording and Playback: From the Snapshot and Recording View, you can use the X-Press™menu to start and stop recording, and to change the pings per
Highlighting a recording: You can scroll through the whole list of recording icons available inthe Snapshot and Recording View using the 4-WAY Cursor
iiHow Sonar Works 1QuadraBeam PLUS™ Sonar...
You can delete the highlighted recording, or all recordings, using Delete Recording or Delete AllRecordings from the Snapshot and Recording X-Press™ m
22Side Beam View Side Beam View shows sonar information from both the left and right 455 kHz beams and the200 kHz down-looking beam in one view. You
23Classic layout: The top portion of the display presents a historical log of sonar returns from the200 kHz down-looking sonar beam. New information i
24Slanted layout: This layout presents the two 455 kHz side sonar beams and the 200 kHzdown-looking sonar beam as three panels of historical data. Thi
25WideSide® View (with optional-purchase WideSide® transducer)WideSide® View is only available if you have purchased and connected an optional-purcha
Bird’s Eye View (with optional-purchase GPS receiver)Bird's Eye View - This view is only available if you have purchased and connected a GPS Rec
Chart View (with optional-purchase GPS receiver)Chart View - This view is only available if you have purchased and connected a GPS Receiver, andshows
28Combo View (with optional-purchase GPS receiver)Combo View - This view is only available if you have purchased and connected a GPS Receiver, andis d
29Viewing Cartography (with optional-purchase GPS receiver)In the Chart or Combo Views (available when you have purchased and connected a GPS Receiver
30Nearest Current Station: Current information for the nearest current station to your presentposition will be displayed. This includes the position o
Viewing Cartography (with optional-purchase GPS Receiver) 29Introduction to Navigation 30Waypoints, Routes and Tracks ...
31Routes link two or more waypoints together to create a path for navigation, and are used in tripplanning. You can link individual waypoints together
32fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower caseletters are available, as well as digits 0-9 and som
33Add a Waypoint Target or Trolling Grid(with optional-purchase GPS receiver)Add or Remove a Waypoint Target: From the Waypointssubmenu, select Target
34Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key. A RouteEdit screen will be displayed with an empty route. You
35Edit Track dialog box appears, use the Cursor keys to move between fields. In the Track Name field,the UP and DOWN Cursor keys change the letter or
36Activate MOB navigation: Press and hold the GOTO key for more than 1.5 seconds to activatethe Man Overboard (MOB) function. Cancel MOB navigation: F
37Key FunctionsYour 700 Series™ Fishing System user interface consists of a set of easy-to-use keys that work withvarious on-screen views and menus to
38If the cursor is not active, the following menu will be displayed. Use the4-WAY Cursor key to select Nearest Port, Nearest Tide Station or NearestCu
394-WAY Cursor Control Key The 4-Way Cursor Control Key has multiple functions, depending on thesituation:• Use the DOWN or UP arrow keys to select a
40GOTO KeyThe GOTO Key has multiple functions, depending on the situation:• If the Cursor is active, pressing the GOTO key while in any view creates a
ivStart-Up Options Menu 44Normal Operation ...
41Accessory BusUse the Accessory Bus to expand the functionality of the 700Series™ Fishing System. Accessories plug directly into the 700Series™ Fish
42The Menu SystemThe menu system is divided into easy-to-use menu modules. The main components of the menusystem are:Start-Up Options Menu - Press the
43Press the MENU key twice for the Main Menu, then use the 4-WAY Cursor LEFT or RIGHT key toselect a tab, and use the DOWN or UP key to select a speci
44Start-Up Options MenuPress the MENU key when the Title screen is displayed to access the Start-Up Options menu.Use the UP or DOWN 4-WAY Cursor keys
45NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from theStart-Up Options menu as opposed to letting the
46Accessory TestAccessory Test lists the accessories connected to the system. NOTE: The speed accessory will be detected only if thepaddlewheel has m
47PC Connect (with PC Connect Cable only)Use PC Connect to update the software of the 700 Series™ control head. This feature requires theuse of the P
Sonar X-PressTMMenuThe Sonar X-PressTMMenu provides access to the settings mostfrequently-used. Press the MENU key once while in any of the SonarViews
49SensitivitySensitivity controls how much detail is shown on the displayand will adjust the sensitivity of all sonar frequencies. Increasing the sens
50Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasherviews only) Upper Range sets the shallowest depth range that will be dis
vRemove Grid (only if Grid is Active) ...
51Lower RangeLower Range sets the deepest depth range that will bedisplayed. Automatic is the default setting. When in automatic mode, the lower range
52Side Beam Range (WideSide® transducer: WideSide® view only) Side Beam Range sets the deepest range that will be displayed in the WideSide® View. Th
53Quad LayoutQuad Layout selects the method used to represent the sonarinformation from the two side-looking beams plus the down-looking beam to be pr
54Bottom Range (Sonar Zoom view only when Bottom Lock is On)Bottom Range allows you to control how much of the water column, measured up from thebotto
55Navigation X-PressTMMenu (optional-purchase GPS receiver, navigation views only)The Navigation X-PressTMmenu provides access to the settingsmost fre
56Waypoint [Name] (Only with an active cursor on a waypoint)Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under yourcursor
57Cursor to Waypoint (Chart or Combo view only)Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you canlocate i
58Save Current Route (only when Navigating)Save Current Route allows you to save the current route being displayed. This menu choice willonly appear w
59Cancel MOB Navigation(only when MOB Navigation is activated)Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and exits Man Overboardmo
60Sonar Window (Combo view only)Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only
viNavigation Menu Tab (with optional-purchase GPS receiver) 77Current Track...
61Snapshot and Recording X-Press™ Menu (Snapshot and Recording View only)The Snapshot and Recording X-Press™ menu providesaccess to the image manageme
62Start Recording (optional-purchase MMC/SD Card, Snapshot andRecording View only)Start Recording allows you to start sonar recording from the Snapsho
63Delete Image (optional-purchase MMC/SD Card, Snapshot andRecording View only)Delete Image allows you to delete a single screen capture image from th
64Delete Recording(optional-purchase MMC/SD Card, Snapshot andRecording View only)Delete Recording allows you to delete a single sonar recording from
65Pings Per Second (optional-purchase MMC/SD Card, Snapshot andRecording View only)Pings Per Second allows you to specify the maximum ping rate for th
66Stop Playback(optional-purchase MMC/SD Card only)Stop Playback allows you to stop playback of a sonar recording from any view. This menuoption is on
67Sonar Menu TabPress the MENU key twice to access the Main Menu System andthen press the RIGHT Cursor key to select the Sonar tab.NOTE: Menu choices
68Beam Select Beam Select sets which sonar returns from the transducerwill be displayed on the screen. When set to 200/83 kHz, the returns from bot
69Fish ID+TMFish ID+TMuses advanced signal processing to interpret sonarreturns, and will display a Fish Symbol when very selective requirements are m
70Fish ID SensitivityFish ID Sensitivity adjusts the threshold of the Fish ID+TMdetection algorithms. Selecting a higher setting allows weaker return
viiTemp Alarm ...
71Zoom WidthZoom Width adjusts the width of the Zoom window on theSonar Zoom View. To change the Zoom Width Setting:1. Highlight Zoom Width on the Son
72455 kHz Sensitivity (Advanced)455 kHz Sensitivity adjusts the sensitivity of the 455 kHz beam. Increasing the sensitivity willdisplay additional wea
73Depth Lines (Advanced)Depth Lines divide the display into four equal sections which are separated by three horizontaldepth lines. The depth of each
74Surface Clutter (Advanced)Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration.The lower the setting,
75Noise Filter (Advanced)Noise Filter adjusts the sonar Noise Filter to limit interference on the display from sourcessuch as your boat engine, turbul
76Water Type (Advanced) Water Type configures your unit for operation in fresh or salt water. The Water Type menu choiceis available when User Mode is
77Navigation Menu Tab(with optional-purchase GPS receiver)Press the MENU key twice to access the Main Menu System,then press the RIGHT cursor key to s
78Current TrackCurrent Track allows you to view the Current Track submenu. To view the Current Track Submenu:1. Highlight Current Track on the Naviga
79WaypointsWaypoints allows you to view the Waypoints submenu.To view the Waypoints Submenu:1. Highlight Waypoints on the Navigation main menu.2. Use
80RoutesRoutes allows you to view the Routes submenu. To view the Routes Submenu:1. Highlight Routes on the Navigation main menu.2. Use the RIGHT 4-
viiiTroubleshooting 109700 Series™ Doesn’t Power Up ...
81North ReferenceNorth Reference allows you to have bearings displayed withone of two orientations: True North or Magnetic North. To change the North
82Track Min Distance (Advanced)Track Min Distance allows you to set a minimum distance of travel before a trackpoint is addedto the track. The Track
83Course Projection Line Course Projection Line allows you to display or hide an arrowextending from the bow of the boat that projects your current co
84Delete All Nav Data (Advanced)Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This menuchoice should be used with
85Chart Menu Tab(with optional-purchase GPS Receiver only)Press the MENU key twice to access the Main Menu Systemand then press the RIGHT Cursor key t
86To change the Map Borders setting:1. Highlight Map Borders on the Chart main menu.2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change th
87Navaids on Bird's Eye ViewNavaids on Bird's Eye View allows you to display or hideadditional navigational aids, such as lights and buoys,
88Set Map Offset (Advanced)Set Map Offset allows you to change the map offset used by the 700 Series™. The Set MapOffset menu choice is only availabl
89Alarms Menu TabFrom any view, press the MENU key twice to access the MainMenu System. The Alarms tab will be the default selection.NOTE: When an ala
90Depth AlarmDepth Alarm sounds when the depth becomes equal to orless than the menu setting. To change the Depth Alarm setting:1. Highlight Depth Al
Kommentare zu diesen Handbüchern